SANDVIK-Drehen:

(1:34)

SANDVIK COROMANT turning tools

(3:9)

PrimeTurning™ demo – Turning of pinion in 40 seconds

(1:17)

SANDVIK COROAMTN Drehen: Sorte GC4405

(2:2)

Sandvik Grade GC2220 – Stainless Steel Turning

(2:9)

SANDVIK-Drehen: Drehen_CoroTurn 300

(1:15)

Sandvik Coromant - CoroTurn300

(2:13)

CoroCut® 2 with -RF geometry - A sharp edge without compromises

(2:12)

HART AM SPAN das neue FIX8 System von Kennametal - Wendeplatten zum drehen für die Schwerzerspanung

(7:10)

CoroMill® MH20 - high-feed milling solution

(3:28)

Sandvik Coromant Never Allowed Cameras In Here Before!

(19:22)

Hochglanzdrehen mit MKD / High Polish Turning with MCD

(3:11)

OptiThreading™ - Thread turning without chip jamming

(2:58)

GC4405 - Designed for high metal removal rates

(2:2)

Dynamic turning troubleshooting in soft steels

(2:59)

SANDVIK-Drehen: Drehen_CoroTurn Prime

(1:12)

SANDVIK-Drehen: Drehen_CoroTurn Prime_Futterteil

(1:49)

SANDVIK COROMANT - CoroTurn 300

(1:29)

SANDVIK-Silent Tools: Drehen - Silent Tool_schwingungsfrei Drehen

(1:37)

SANDVIK-Drehen: Drehen_CoroTun Prime II

(1:27)

SANDVIK-Drehen: Drehen Sorten GC4415 and GC4425

(2:11)

SANDVIK-Drehen: Drehen_Dynamisch mit runden Platten

(2:3)

SANDVIK-MultiTask: Drehen CoroTurn Prime Twinhalter

(2:11)

Y-Axis finishing Sandvik tool programmed by Gibbs CAM

(31)

Sandvik Prime + Y-Axis Turning Demo programmed with Gibbs CAM

(6:5)

Sandvik Coromant - Wendeplattenherstellung

(6:21)

Y-axis turning: one tool for all turning operations

(2:53)