Richard Raffan shows his slicer tool close up and two ways of nesting bowls

(10:21)

Richard Raffan turning a hard gnarly Tasmanian myrtle burl.

(26:33)

Richard Raffan shows a safe way of drilling large holes in small woodturning blanks.

(1:48)

Richard Raffan completes a nested pair of Tasmanian blackwood bowls.

(24:38)

Richard Raffan gets two bowls from inside a block of highly-figured Tasmanian blackwood.

(32:27)

Richard Raffan on ways of cutting a seasoned slab of figured camphor laurel.

(7:42)

Richard Raffan turns a large crossgrain box with an inset knob

(43:16)

Richard Raffan turns a pagoda box for the 23rd 4-Ways Project

(38:46)

Richard Raffan roughing a crossgrain square to a cylinder

(4:32)

Richard Raffan turns handles for a pair of thread chasers

(13:8)

Richard Raffan on skew chisel basics

(27:4)

Richard Raffan - from log to bark-rimmed bowl. 4-Ways project #7.

(57:9)

Richard Raffan woodturning chucks

(9:38)

Richard Raffan completes a nested pair of Tasmanian blackwood bowls.

(24:38)

Richard Raffan on gouge entry cuts when turning wood.

(25:9)

Richard Raffan turns a large crossgrain box with an inset knob

(43:16)

Richard Raffan turns a mallet

(11:1econd)

Richard Raffan on skew chisels and catches

(19:15)

Richard Raffan turns winged box for the 21st. Four-Ways project.

(41:52)

Richard Raffan converts pear logs to roughed bowls.

(23:1econd)

Richard Raffan on basic stuff woodturners need to know about wood

(9:54)

Richard Raffan on back-hollowing into endgrain

(14:21)

Richard Raffan — your first go on a wood lathe.

(19:39)

Richard Raffan turns a pair of ladles.

(24:31)

Richard Raffan gets two bowls from inside a block of highly-figured Tasmanian blackwood.

(32:27)

Richard Raffan roughing a crossgrain square to a cylinder

(4:32)

Richard Raffan turns a rectangular bowl

(39:35)

Richard Raffan turns spalted wood unknown to him.

(25:26)

Richard Raffan shows a safe way of drilling large holes in small woodturning blanks.

(1:48)