Sharmans - Installation Golden Rules

(7:18)

Sharmans- Installation Golden Rule 3: Envelope fold the stop ends

(47)

Sharmans - Installation Golden Rule 1: Preparation

(57)

Sharmans - Component Fitting 2: Fit liner

(4:13)

Sharmans - Installation Golden Rule 10: Trap or fix the liner

(32)

Sharmans - Component Fitting 6: Side outlet

(7:34)

Sharmans - Installation Golden Rule 4: Angle Blanks

(37)

Sharmans - Installation Golden Rule 9: All welds must be free from moisture

(45)

Sharmans Component Fitting 5: Moulded weldable stop end

(4:38)

Sharmans - Installation Golden Rule 2: Pin outer thimbles

(42)

Sharmans - Installation Golden Rule 7: Ensure the liner is pressed firmly along the crease lines

(30)

Sharmans - Installation Golden Rule 5: Always use the proprietary cutting tool

(52)

Sharmans - Component Fitting 4: Split thimble fitting

(6:38)

Sharmans - Installation Golden Rule 12: Probe test all welds

(27)

Sharmans - Installation Golden Rule 11: Trap or fix the wind uplift restraints

(35)

Sharmans - Installation Golden Rule 8: Mechanically pin the liner around the outlets

(31)

Sharmans - Installation Golden Rule 6: Insert split thimbles at 45 degrees

(41)

Sharmans - Component Fitting 1: Standard stop end set

(2:20)

Sharmans - Plygene Gutterline system

(2:20)